HOME | MIC PREAMPS | TUBE MIC POWER SUPPLIES | NEW KITS | SUPPORT | DOWNLOADS | PRODUCTS      

Tube Microphone Power Supplies: TMPS MK2: In Stock

tmps

 

The MK2 is an updated version of our Previous TMPS line we carried for over a decade. The new chassis is steel, with a separate compartment for the AC section. The electronics are very similar to our previous model, with a handful of improvements.

FEATURES:

MODELS (click on pictures for details/pricing):

tmps1

 

TMPS1 (Single Channel): KM53, KM54, KM56, KM56C, KM64, U47-EF14, U48-EF86, U67, CMV3, CMV563, M50, M221B, M250B, M582, C12A, C61, Sounddeluxe E49, ELAM250E, ELAM251E...

Most microphones without remote pattern selection.

tmps 2

 

TMPS2 (Dual Channel): Same as TMPS1x 2 channels. KM53, KM54, KM56, KM56C, KM64, CMV563, M50, M221B, M250B, M582, C12A, C61, Sounddeluxe E49, ELAM250E, ELAM251E.

Not available for mics with remote pattern selection, or tubes that draw more than 0.2Adc filament current.

tmps 1x

TMPS1X (Single Channel Pattern Selecting): Remote pattern selecting microphones, M49, M269, UM57, C12, C12A & B.


Field Calibration, Filament / Plate Voltage Link

Known Microphones the TMPS supplies cannot power:

AKG C60, Sony C37A, Lomo 19A9

A handful of microphones have the output transformer to the audio circuit in the power supply. These will not work with the TMPS supplies that provide clean regulated power, but do not contain any audio circuitry other than the output connector. Custom making a supply for these mics would be very cost prohibitive, so we recommend you look for the original.